Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
My new EDC belt
19 October 2015, 10:31,
#1
My new EDC belt
My new EDC belt
Often I find its quite hard to get EXACTLY the sort of gear you need so you have to compromise, But is it always necessary to accept a compromise for ESSENTIAL gear like EDC gear that you rely on and tend to wear or carry 24/7/365.

I used to wear standard 1 ½ leather belts both conventional and ranger types I find the good quality ones are getting very expensive and harder to find, and the more affordable ones made in China or Mexico simply don’t last or they distort far too easily to remain reliable and functional.

So like many others I moved over to the far more affordable, cheaper but generally far more functional WEBBING type belts often called Training bets and Rigger belts

I only ever wear Cargos / Contractor pants or on occasion a pair of Wranglers, I like Regatta and Craghopper brands but there is a problem.

Though these pants come with 40 mm belt loops to accept 38 mm (1 ½) belts you cannot easily pass 38mm (1 ½) Fastex type buckles through them. I needed something different, simple and functional, so I ended up making my own.

Its 38mm webbing but with 25mm Fastex buckles and Velcro secured adjuster, maybe they are already available but I have not seen any, but chances are the US will have them.

A double thickness 38mm belt with 25 mm buckles provides the stiffness and support you need, but allows easy bending at the waste and or course its easy to loop the belt though the pants.

And I’ve sewn a few goodies between the layers inc a Scalpel blade, 5 £1 coins, some water puri tabs and a button compass.
…………………………………………………………………………………………………………….
Quite simply I used TWO layers of 38 mm webbing sewn together with a 25 mm webbing layer sandwiched between the two 38mm layers, this gives the stiffness needed to hang stuff like multi tools, knives and flashlights without the belt folding up or sagging. All ends of the webbing cauterised to stop unravelling.
The three layers in total I sewed together by hand using double lengths of polyester thread with knots every ten thread loops (about ½ “apart). I mounted the two 25mm sections of the Fastex buckle to 25 mm webbing and sewed them to both ends of the belt, I sewed some Velcro on the loose adjuster strap to tidy things up and keep everything secure.

Reply
20 October 2015, 07:20,
#2
RE: My new EDC belt
Nice job NR, however I would have excluded the £1 coins - they'll show up on metal scanners.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)