8 May 2012, 00:41
Ultra-light meth stove and stand, I wanted something small for my edc went looking online at quite a few and liked this design, took about an hour to make/clean and burn in.
Burn out the plastic lining and drill 4 holes this is to prevent meth overflow.
I used fire cement to seal and hold in place the inner meth wall, just heat on a home cooker to harden.
Burn out the plastic lining and drill 4 holes this is to prevent meth overflow.
I used fire cement to seal and hold in place the inner meth wall, just heat on a home cooker to harden.