+- Survival UK Forums (http://forum.survivaluk.net)
+-- Forum: Discussion Area (http://forum.survivaluk.net/forumdisplay.php?fid=13)
+--- Forum: An Open Box (http://forum.survivaluk.net/forumdisplay.php?fid=78)
+--- Thread: PING Tartar Horde (/showthread.php?tid=7467)
Pages:
1
2
RE: PING Tartar Horde - Tartar Horde - 18 December 2014
Regarding the above discussion I direct everyone interested to read the comments.
http://www.archerytalk.com/vb/showthread.php?t=1250591
RE: PING Tartar Horde - NorthernRaider - 18 December 2014
Point made and accepted.
RE: PING Tartar Horde - Devonian - 18 December 2014
(18 December 2014, 21:42)Tartar Horde Wrote: Regarding the above discussion I direct everyone interested to read the comments.
http://www.archerytalk.com/vb/showthread.php?t=1250591
(18 December 2014, 22:11)NorthernRaider Wrote: Point made and accepted.
Make me think a SGC or FAC is far safer and the better option!
RE: PING Tartar Horde - NorthernRaider - 18 December 2014
Naaaa I love my compound bow
when I get better with it I want one of those ultra short Compounds with parallel limbsThis is the same model that I am learning
https://www.youtube.com/watch?v=nv6AiqeftUI
RE: PING Tartar Horde - Talon - 19 December 2014
Gorgeous bow Tartar.I do like the Mongolian style of bow but I've never tried using a thumb ring I'm very much a three finger guy,back to the compound discussion.I have owned three compounds in my life,two Barnetts and for a very brief time a Hoyt (can't remember the model name) The two Barnetts both had the old fashioned round cams and the Hoyt had ellipticals.
The Barnetts though powerful for their time still felt very smooth.The Hoyt was an absolute speed demon and would deeply imbed arrows into my target (so much so that retrieval was a pain in the arse).
I've read the link you posted and I'm going to backtrack somewhat . For older or lighter draw traditional round cams I still would not hesitate to use wood,but for higher poundage modern twin or single cam ellipticals I would say definitely not.
Which is what you pretty much said at the start I should have kept my gob shut
RE: PING Tartar Horde - NorthernRaider - 19 December 2014
The two Banshees we have are round cams the Genesis is one round and one elliptical !!! I'll play safe.
RE: PING Tartar Horde - Tartar Horde - 19 December 2014
To really get the most from your compounds modern shafts are the way to go. If I had one I would use sighting systems and a trigger release, the full monty. Wooden shafts will never match the tolerances of Alloy/Carbon. They will be virtually identical in weight and spine, something Wood shafts can never equal. With a set up like this your compounds will be very accurate, and to be honest that's what it's all about.
(18 December 2014, 22:32)NorthernRaider Wrote: Naaaa I love my compound bow
This is the same model that I am learning
https://www.youtube.com/watch?v=nv6AiqeftUI
That's a very capable bow NR, with a good sighting system and a little practice you should be very accurate. Don't forget it's all about the arrows mate. Any bow is only as good as the arrows shot out of it, to quote ISHI the American Indian
"any stick can make a bow, but it takes a damn good stick to make an arrow", this guy shot Wooden shafts so he understood how hard it is to get a good set of matched shafts. Modern shafts are sooo much easier to shoot and get good results with. But i like the pain and misery so will stick with Natural. It's one reason I shoot Bamboo shafts as I believe they are better than Wood.
RE: PING Tartar Horde - NorthernRaider - 7 January 2015
TH both your E mail and PM systems are full and not accepting messages.
RE: PING Tartar Horde - Tartar Horde - 7 January 2015
(7 January 2015, 11:47)NorthernRaider Wrote: TH both your E mail and PM systems are full and not accepting messages.
MMM just checked them NR and both are ok with no new mails or anything, try again mate.