Armex Tomcat MKII 80lb crossbow pistol review

[Tartar Horde]

In the last few days I have shot at least a few hundred bolts out of this little crossbow at a measured 10yds. The Achilles heel on this weapon is the quality of ammunition that is generally available. I purchased 15 bolts at first and started testing them in batches of 5. Out of those 15 bolts I found only 9 to be within acceptable tolerances regarding flying true and quality of build. There are two problems with the bolts available, 1 is the fletchings used. These tend to deform and do not always return to true straightness, and the points on the bolts tend to be crimped on allowing them to rattle a little bit. The fletchings are not a problem to cure as I have put some Turkey fletchings on them which you will have to cut down to size (no problem here). I have found some 6.5 inch bolts that have screw in points which would allow the fitting of two blade broadheads (three blade won't work) but I reckon you would have to use 100grain.

http://www.ebay.co.uk/itm/12-X-6-5-Pisto...43b7bb0fe7