Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Excalibur crossbows
19 December 2018, 21:56,
#29
RE: Excalibur crossbows
I mentioned earlier that I'm not a fan of Titan springs in older guns . I'm not . They really did use softer springs back in the day . The Titan is a quality Spring though and will be fine in a rifle like the 80 . Just fitting a Titan will get the rifle well over the limit .
I suggested you buy an aftermarket spring to store Broom . It really isn't worth the risk of having an unregistered firearm while the rule of law still applies , by all means fit it and see what power its generating . Then remove it and store .
The big problem with an 80 is keeping it under the 12ftlb limit . The single most important item you should own after getting an air rifle is a chronograph . Not only to ensure you're legal ,but to test results after any work carried out and to check the results of different pellets . A chrono is an absolute must and you can pick a barrel mounted one like I have for £50 . It's a must have purchase , especially in a country like ours with strict air gun laws . Ignorance is no excuse in the eyes of the law and the HW80 has a well known reputation . More than any other springer in the uk and the police are well aware of it .
The standard Weihrauch Spring and piston seal are both very well made . Mort mentioned Tinbum kits . I have one in my HW99 . And a Tinbum top hat in my .177 Webley mk3 . I highly rate them .
There really is a vast wealth of knowledge on the net regarding the 80 Broom . Tinbum kits and springs are available from eBay .
Reply


Messages In This Thread
Excalibur crossbows - by Chief Broom - 13 December 2018, 12:55
RE: Excalibur crossbows - by Talon - 14 December 2018, 06:29
RE: Excalibur crossbows - by Chief Broom - 14 December 2018, 09:53
RE: Excalibur crossbows - by Mortblanc - 14 December 2018, 13:52
RE: Excalibur crossbows - by Chief Broom - 14 December 2018, 14:50
RE: Excalibur crossbows - by Talon - 14 December 2018, 17:11
RE: Excalibur crossbows - by Chief Broom - 14 December 2018, 22:09
RE: Excalibur crossbows - by Mortblanc - 15 December 2018, 18:05
RE: Excalibur crossbows - by Chief Broom - 15 December 2018, 20:06
RE: Excalibur crossbows - by Pete Grey - 15 December 2018, 22:27
RE: Excalibur crossbows - by Mortblanc - 16 December 2018, 11:03
RE: Excalibur crossbows - by Pete Grey - 17 December 2018, 00:11
RE: Excalibur crossbows - by LAC - 16 December 2018, 03:31
RE: Excalibur crossbows - by Chief Broom - 16 December 2018, 10:26
RE: Excalibur crossbows - by Steve - 16 December 2018, 19:30
RE: Excalibur crossbows - by Talon - 17 December 2018, 06:33
RE: Excalibur crossbows - by Mortblanc - 17 December 2018, 09:13
RE: Excalibur crossbows - by Pete Grey - 18 December 2018, 00:18
RE: Excalibur crossbows - by Talon - 17 December 2018, 10:03
RE: Excalibur crossbows - by Midnitemo - 18 December 2018, 14:07
RE: Excalibur crossbows - by Midnitemo - 18 December 2018, 14:22
RE: Excalibur crossbows - by Mortblanc - 18 December 2018, 21:44
RE: Excalibur crossbows - by Midnitemo - 19 December 2018, 04:11
RE: Excalibur crossbows - by Mortblanc - 19 December 2018, 08:25
RE: Excalibur crossbows - by Chief Broom - 19 December 2018, 12:56
RE: Excalibur crossbows - by Mortblanc - 19 December 2018, 18:24
RE: Excalibur crossbows - by Chief Broom - 19 December 2018, 19:40
RE: Excalibur crossbows - by Mortblanc - 19 December 2018, 21:35
RE: Excalibur crossbows - by Talon - 19 December 2018, 21:56
RE: Excalibur crossbows - by Chief Broom - 19 December 2018, 22:53
RE: Excalibur crossbows - by LAC - 20 December 2018, 01:49
RE: Excalibur crossbows - by Mortblanc - 20 December 2018, 18:47
RE: Excalibur crossbows - by CharlesHarris - 20 December 2018, 19:30
RE: Excalibur crossbows - by LAC - 20 December 2018, 22:49
RE: Excalibur crossbows - by Mortblanc - 21 December 2018, 16:28
RE: Excalibur crossbows - by LAC - 21 December 2018, 23:45
RE: Excalibur crossbows - by Talon - 22 December 2018, 13:28
RE: Excalibur crossbows - by Mortblanc - 22 December 2018, 18:43

Forum Jump:


Users browsing this thread: 1 Guest(s)