What have done towards your prep?

[Straight Shooter]

Insulation data........Floor on top of the concrete raft 110 mm kingspan 18mm t&g boards 600mm x 2400 mm
......external walls timber studs 140mm ....in between studs 100 mm kingspan internal of stud (inside) 25mm kingspan with 12 mm plasterboard (no cold spots thru stud ) external face of stud ...18 mm os board then breather membrain the 12mm cement board ...then 100 mm insulation ...this was bonded onto the cement board.... then scratch coated (including 100% scrim mesh ) then sub coat 100% then primer coat 100% then top resin coat finish ....Pitched roof (ceiling joists / truss) 100 mm in between joists then 100 mm over the top then 100 mm on top again in the opposite plain. Windows and doors rated A 28mm o/a unit size .....one thing LS the use of 25 mm kingspan on the inner wall face is paramount !!!! this stops any transfer of any cold spots EG studs when fitting stagger (bond the joints ) so that plaster board never lines up with the kingspan joints ........ How did you about my mirror ? spec its you flying that bloody drone...i am shooting the bastard down next time i see it......and before you grass me up on those maid costumes hanging on the line the other day....they are NOT mine .....or even wifeys ....i was simply washing then for a friend and just because i was wearing high heels .....my nice red ones .....means absolutely Nothing.