Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
old blackpowder guns
10 January 2014, 11:53,
#1
old blackpowder guns
I would like to ask folks who have a working knowledge of firearms about old style flintlock/percussion cap weapons. Granted that these weapons will be antiques, but is it the age of the gun that would make it dangerous, or the condition of the barrel etc. Does the fact that they are old mean that they can't be shot due to the metal deteriorating through age, or is it really down to condition?
Reply
10 January 2014, 14:21,
#2
RE: old blackpowder guns
Can't comment on your question, but if you ever shoot one, be sure to have ear protection. They are LOUD!!!. I had the foam ear plugs followed by ear defenders in when at the range & they were still loud as hell. It wouldn't take too many shots to cause permanent damage to unprotected ears.
Reply
10 January 2014, 15:16,
#3
RE: old blackpowder guns
I was a member of a club when i lived in Bristol that specialised in older gun's and most people shot reproduction gun's not authentic antiques....partly because of there age(value) and partly because of there unknown condition.....black powder is much more volatile than propellant, it explodes when confined rather than burns really quickly...the pressure spike can be enormous and 200+ year old metallurgy can be tired if not flawed from the outset, people xray guns first if they want to shoot pukka oldies.
Nothing is fool proof for a sufficiently talented fool!!!!
Reply
10 January 2014, 16:08,
#4
RE: old blackpowder guns
I have played with over a dozen black powder guns over the years. I have kept only two. One rifle, one revolver.

Both are used for deer hunting during the "primitive weapons" season and have proven effective.

My Ruger Old Army .45 single-action blackpowder revolver, has a 7-1/2" barrel. I have for it two extra fitted cylinders which I ordered from the factory. As the revolver comes from the factory it is sighted for round balls and target loads. To use heavy charges and bullets it needs a higher front sight about 1/8" higher than the one which comes on it. I started by welding a blob of metal onto the existing blade and filing it in to zero, but after a while I decided that the factory rear sight was less rugged than I wanted, so I had a gunsmith set up the revolver exactly as I wanted it. He set back the barrel and recut the forcing cone, line bored the several cylinders I had for quick reloads, shimmed the hammer for a faster hammer throw, did a trigger job, etc. "the works." To me the extra cost was worth it, because the revolver is powerful, accurate, reliable and dependable in the field.

I replaced the original factory sights with Hamilton Bowen's "Rough Country" rear sight, which are sturdy, machined steel, with locking screws, designed for ruggedness in field use. I also had fitted a custom front base having several Holland & Holland type interchangible "caterpillar" blades to enable precise zeroing and clear sight picture. My hunting load with Lee 250-grain R.E.A.L. bullets hit exactly on at 25 yards with all the Pyrodex P or 3Fg black powder that the chambers will hold. A charge of 35 grs. of 3Fg or "P" gives ballistics about the same as a .45 Colt cartridge gun, about 900 fps with the 250-grain bullet. Typical groups fired off sandbag rests are 2 inches or less at 25 yards. It shoots clear through deer from any angle and leaves a good blood trail because the loading lever rammer reforms the Lee bullet into a .45 cal. wadcutter!

I set up this Ruger as a specialized hunting pistol because it was not legal to carry a cartridge handgun during the blackpowder season, but we are bothered with packs of feral dogs and I wanted a quick follow-up shot capability. Carrying a .45 or larger blackpowder revolver along with a muzzleloading rifle is legal for hunting in my state. I have killed several deer with it at short range from my tree stand, and it is quite effective at reasonable ranges within 25-40 yards, where my ability to make well-aimed, vital hits is adequate.

I also have a cartridge conversion cylinder for the Ruger revolver made by Walt Kirst, so that I can shoot .45 ACP ammo in it. This works very well. Any factory load is safe in it and shoots to the sights with normal velocity and accuracy with 230-grain jacketed hollow points, which are effective personal defence or hunting ammunition.

I also have a single-shot, blackpowder rifle, a T/C Renegade rebarrelled with a Green Mountain .50 cal., one turn in 28" twist barrel, being short and handy only 24" long, for bush work. It stabilizes either 370-grain Maxi bullets or sabot rounds well. Firing a T/C Maxi Ball and 100 grains of 2Fg or Pyrodex RS velocity is 1600 fps and I get 2 inch groups at 50 yards or 4-5" at 100 with iron sights. It has also killed about a dozen deer over the years, as we get four tags with the annual licence. I cast bullets for my black powder guns using 1:40 tin lead using a Saeco double-cavity mold modified by http://www.hollowpointmold.com with Erik's inset bar cup-point conversion. The nose cavities look like the old Webley Manstopper bullets, as if you made a dimple by pushing a .22 short bullet into the nose.

I bought these guns originally for recreation. But after Obama was elected I bought an ample supply percussion caps and Pyrodex to feed them, got the bullet molds and wad punches. I started shooting the Old Army in cowboy matches to get used to the "Pale Rider" method of cowboy combat reloading. I now appreciate why the old West gunfighters carried two revolvers!

I tried briefly several Italian Uberti and Filli Pietta reproductions of .44 Colts and Remingtons. I shot them a great deal over the course of a year. None were as accurate or reliable as my Ruger. In particular, a brass frame Remington loosened up to .020" of end play, sufficient to cause misfires after firing less than 300 full charges of 30 grains of 3Fg and round balls. Cabelas replaced it with a steel one which I shot for a year and even got a Kirst cartridge conversion for it, but it was less accurate, didn't shoot to the sights and overall was a long far cry in performance from the Ruger.

So, my advice is that if you will get only one cap & ball revolver pay whatever it costs to finds a Ruger Old Army with adjustable sights. If limited to the factory sights, use round balls, loaded with as much powder as you can cram into the chambers. That will be about 40 grains of 3Fg which obtains about 1000 fps with a 146-grain .457: ball, kinetic energy of this load is the same as fiuring 38 Special +P or 9mm 147-gr. OSM subsonic.

If really serious about deer stalking with your revolver, spend the money for gunsmith fitting of a 1/8" higher front sight and use the Lee 250-gr. R.E.A.L. and 30 grs. of 3Fg for 900 fps. Once you get a good zero, flood the factory Ruger rear sight with Crazy Glue or Loctite thread sealant so that it will resist recoil vibration and then stay zeroed!

You could make a good case for a companion .45 percussion rifle which could use the same projectiles as the revolver. I did try a T/C Cherokee .45 rifle for a year. I worked up to 80 grains of 3Fg with the 250-gr. Lee R.E.A.L. for 1350 fps and 2 inch groups at 50 yards with iron sights, but recoil of the very light rifle was unpleasant. Its kinetic energy was no more than a .44-40 Winchester, less effective on deer than my .50 cal., which was an absolute stone killer equal to the old .50-70 service round they used to kill buffalo and shoot Indians.

A reliable blackpowder rifle suitable for deer should be not less than a .50 cal. In elk, bear or moose country a .54 cal. makes sense, and is dangerous game capable even with a round ball, firing a heavy load of 100 to 120 grains of powder. Just ask Merriweather Lewis!

I have used roundballs for deer, killing with them well with n80 grains or more of powder in the .50 cal. But, if you hunt with roundballs you must remember that their poor aerodynanics cause them to lose HALF of their kinetic energy in traveling the first 50 yards. So to have an effective 100 yard deer load you must drive them over 1800 fps! Dedicated .50 cal roundball rifles are usually twisted one turn in 66." When I was in New Hampshire I killed deer with a flintlock driving a .495 ball at 2000 fps with 120-grains of powder from a 40" barrel. Pure lead balls flatten on impact and kill much better than a .30-30!

Maxi-Balls and R.E.A.L. bullets need a twist of 48" or faster in the .50 cal. to stabilize adequate. Sabot rounds need 32" twist or faster. A fast twist limits how hard you can drive patched round balls with accuracy. The limit is about 90 grs. of powder in a .50 for 1800 fps in a 30" barrel for about 1800 fps, and 2-1/2 to 3" groups at 50 yards. An adequate 50-yard deer load.

My 28" twist Green Mountain LRH barrel is intended for shooting Maxi bullets or Sabots and does not handle round balls at high velocity, but shoots them adequately with light charges down to about 30 grains of powder for about 1050 f.p.s. from the 24" barrel with ragged hole 25-yard groups or 2" groups at 50 yards, which are just fine casual target work and small game shooting or head shots at deer out my kitchen window into my back yard country garden. Great to save powder and lead in hard times. The energy of such a load is about the same as a modern .40 S&W pistol.

If we were reduced to owning only blackpowder guns, a similar, modest battery would be very much better than having no guns at all. You could feed yourself and they would serve as a defensive deterrent against people who are not inclined to fight when the victim is armed at all. But God help you if you get into a fight with somebody who is armed with modern weapons and is determined to kill you. Then you must accept your fate, make your shots count, make it as costly as possible for the evil ones and take a bunch of the bastards with you....

73 de KE4SKY
In
"Almost Heaven" West Virginia
USA
Reply
10 January 2014, 17:46,
#5
RE: old blackpowder guns
TH have you got anyone from "Sealed Knot" in your area? they'll know all about black powder guns.
Some people that prefer to be alone arent anti-social they just have no time for drama, stupidity and false people.
Reply
10 January 2014, 18:05, (This post was last modified: 10 January 2014, 18:23 by Midnitemo.)
#6
RE: old blackpowder guns
Its not commonly known but you can own a blackpowder/antique gun in fully functioning order if it is considered to be an obsolete caliber...old duelling pistols...pinfires...pepperpots....muskets!!!!! you could buy a wallhanger/boxed pistol then get it xrayed to make sure its safe...commision a mould for the ammo buy some pyrodex p synthetic black powder substitute (legally) and some caps if needed.....and you'd be legally equiped with a functioning gun....the minute you loaded it you would be liable to a five year jail sentence though.

or if you didn't want to go to the expense of having a bespoke mould made for the ball's you could buy the nearest size under and use an extra thick patch....the lead balls can be bought ready cast in a huge range of sizes....tis a dear way to go about having a functioning gun in your possesion but it requires no paperwork or involvement from tptb which i know a lot of you are paranoid about....much easier to just go the section 2 shotgun route and it would be a much better tool in a shtf scenario.
Nothing is fool proof for a sufficiently talented fool!!!!
Reply
10 January 2014, 18:44,
#7
RE: old blackpowder guns
Do I understand correctly, that in UK if you own a blackpowder firearm and intend to shoot and practice with it regularly to gain confidence and proficiency with it, you need to belong to a gun club or have legal access to rural farmland where you are allowed to hunt? What type of licence is required? Would the shotgun licence cover this?

Just trying to understand the world you live in....and to count my blessings.

73 de KE4SKY
In
"Almost Heaven" West Virginia
USA
Reply
10 January 2014, 19:49,
#8
RE: old blackpowder guns
We aren't allowed to hunt with pistols in the UK, and I think it's sensible. We are also very unlikely to get permission to target shoot with revolvers on our own land, so club membership is a must.

By the way, 777 works well in ROA, 35grns is the max recommended charge, which equates to a 44 Special case full. I have used 44 mag cases as a scoop, about 40grns, which is lively. Both with 147grn ball, CCI standard cap.
Reply
10 January 2014, 22:03,
#9
RE: old blackpowder guns
I don't think you can hunt with a black powder gun mainly because of the minimum criteria....I cant think of a bp rifle that makes all the dear legal requirements in the uk as for vermin control I know of nobody personally who uses a bp weapon but I'm sure some do(bp shotguns) most black powder shooters shoot on ranges and usually on a range day that the club has designated as a black powder day, only exception being gallery ranges where you can use what you like as long as its below the range parameters....owning and use of black powder is licensed too!!!!! separately to the guns.
Nothing is fool proof for a sufficiently talented fool!!!!
Reply
10 January 2014, 23:40,
#10
RE: old blackpowder guns
I would like to ask folks who have a working knowledge of firearms about old style flintlock/percussion cap weapons. Granted that these weapons will be antiques, but is it the age of the gun that would make it dangerous, or the condition of the barrel etc. Does the fact that they are old mean that they can't be shot due to the metal deteriorating through age, or is it really down to condition?

OK Tarter Horde you have just entered my area of academic expertise. Got the degree in Cultural Resources Management and Museum Management and Conservation to go with it. I have the workshop full of dismantled parts waiting to be returned to usable condition that goes with this obsession too!

And since you did not ask about "modern BP guns" I will not give a thesis on that marketing dominated subject.

A gun never gets too old to fire.

It can get too neglected(rust), too abused(overloaded and shot loose) or too worn(normal wear and abrasion removing metal) to shoot.

With BP guns, and firearms in general, it is the construction and condition that determines safety.

A well made gun that is in good condition and that is 500 years old will still be safe to shoot.

I have seen museum specimens from the early 1700s that I would shoot without hesitation. And needless to say, I have seen some modern made trash I would not touch with a pole!

However, while inspecting and renovating hundreds of original guns, I have come to realize that standards of manufacture and safety have changed radically over the years and I have to address that problem when speaking of a "well made, in good condition specimen".

One of the areas of construction that has changed over the years is the breech plug, the closure of the rear of the barrel. It is normally a threaded plug.

In the old days the plug might be 1/2 inch long with crude hand cut threads. The plug fit might be so lose it could be turned in and out of the breech with only finger pressure. That was normal and expected in the old days so that men in the field could unbreech and clear a load that failed to shoot.

Today most of the breech plugs are 3/4" long with precision machined threads, set to a crush fit in the breech and often pinned in place with a hardened dowel.

The second area of concern is the thickness of the barrels. Modern barrels are thick to excess for insurance purposes. Old gun barrels are normally about half the thickness of modern tubes, some are paper thin, and if there is any corrosion or rust intrusion from the inside of the tube they have little margin for error.

In order to determine if one of the old muzzle loading pistols is safe requires that one tear it down and inspect the parts for quality, fit and finish. One must know exactly what they are looking for.

I have two smoothbore guns that I restocked using original barrels. I have fired both those guns in the field and in competition. Sad to say, neither will outshoot my modern made BP barrels.

I have dozens on friends that shoot original/antique muzzle loading firearms on a regular basis. Most of them are long guns due to the scarcity of pistols in the history of our area. People were free to carry their rifles and smoothbores without hindrance so their need for a concealable weapon was less than in more cosmopolitan areas. I have one friend that inherited a fine boxed double barrel percussion 10 gauge that was brought from Germany, in the 1860s, by his ancestors. He shoots it in BP clay bird competition several times each year.

I note that the conversation almost automatically went to cap and ball revolvers. They are an entirely different breed of firearm from the single shot muzzle loading pistol or long gun.

In may cases the C&B revolver is a product that was manufactured by mass production standards to strict tolerances from metals that were equal to what is available today. I have encountered fine old Colt and Remington Army .44 revolvers and .36 navy revolvers that were passed down through families and were still being shot regularly. In some cases I have repaired original C&B revolvers using parts produced by Uberti or Pedersoli and sent them back out to be shot for another 150 years. Some were still as tight and sound as the day they were made.

As for the "legalities", I did not see that addressed in the OP so why sidetrack the thread with it?
__________
Every person should view freedom of speech as an essential right.
Without it you can not tell who the idiots are.
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)