UV5R HT Programming Images

[OpSecRadio]

Thank you for all your hard work on this LS, it is really appreciated.

If your radio is displaying only the frequency after loading the images it is quite easy to change this to show either channel number or channel name:

1. Press Menu button to enter the menu system.
2. Enter 21 – this takes you to menu item 21, or you could just scroll up to it with the up/down buttons.
3. Press Menu button again to enable change
4. Use the up/down buttons to scroll between Frequency, Channel, Name as required.
5. Press Menu button to accept the change
6. Press Exit button to exit the menu system.